Side Lighting
Zachary Jarrell
@Isolines ·
After getting tired of rechargeable led lights on my V1 doors, I installed permanent side lighting. I have linked the two parts down below.
I ordered the aluminum tracks (https://www.amazon.com/dp/B0F8BMF4QQ?ref=ppx_pop_mob_ap_share). I opted for the .5m sections so I didn’t have to cut but there are other lengths available.
Next I ordered the LED strips and cuts to size (https://www.amazon.com/dp/B08VW7RQQJ?ref=ppx_pop_mob_ap_share). There were DC connectors on each end so I cut those off and used the flying leads for wiring.
I taped the tracks up on the sides, see photos, and then taped the LED strips inside. I wired them together and then wired that to the juicebox. I don’t have the squat h spotter so I used the “light bar” button since they kinda are light bars.
I’m happy to answer any questions or provide more photos if needed!
15 views
6 replies
2 likes
Discussion (6)
Cody Streeter
· @SimpleInstinct
·
Good write up. I used these with the sticky back and they didnt melt off over the summer. https://a.co/d/0gLPYi4D
Dain Cummings
· @Dain
·
Thank you, I just ordered exactly what you posted to add to mine. I have some interior lights but I am looking for something a little more. Do you have more pictures of the finished product? I’d love to see how you ran everything as I am as electrically inclined as a toddler.
Zachary Jarrell
· @Isolines
·
@Dain Cummings Yeah I’ll have to grab some for you later today!
Zachary Jarrell
· @Isolines
·
@Dain Cummings
Dain Cummings
· @Dain
·
@Zachary Jarrell Badass thank you!
Zachary Jarrell
· @Isolines
·
@Dain Cummings Sure thing! Reach back out with any questions!